Most of these stories were published by software companies, so read every number as the customer's account, told on the vendor's website. The specific details are usually the believable part: the whiteboards, the paper receipts, the van stock nobody had used in years. They look a lot like a typical 10 to 100 person electrical shop.
Enhanced Electrical: the estimate never met the actual
Enhanced Electrical does residential, commercial and industrial work around Reno and Sparks, Nevada. In a customer story published by Simpro, the field service software they bought, co-owner Rebecca Baffrey describes the before picture: whiteboards, separate programs, paper and pencil. Materials that weren't on the price sheet were hard to track, and she said they knew they were losing money on it.1
Two changes stand out. Techs started entering materials on the job, and supplier and warehouse receipts got attached to each job so they'd land on the invoice. The company also started checking original estimated hours against actual hours, which Baffrey said changed how they bid.1
The results she gives are mostly about cash. Invoices that took about four to six weeks per job now go out within a few days. Customers pay within 30 days, where it used to take 60 to 90. Invoicing work fell from about 25 to 30 hours a week to maybe five to ten. She also said they found they didn't need the two extra office staff they'd thought they would have to hire.1 The story is undated, but they became a customer in September 2019, so it's likely several years old.
Middlebury Electric: five or six programs and a weekly price check
Middlebury Electric in Goshen, Indiana, handles industrial and commercial work, from emergency service up to multi-million dollar projects. Simpro's story lists 40 employees, with around 200 jobs going at any given time. President Jason Wogoman said they had no idea what materials they had, and that "from quoting to invoicing, we were using five or six programs."2
Two habits here are worth copying whatever you run. The first is a price discrepancy report, run about once a week, comparing what suppliers invoiced against the prices the company had agreed to. Wogoman said the money it recovers pays for the software. The second is a look at what's on each van. They used it to drop items techs were carrying and not using, including one that hadn't been touched in six years.2
There are no dollar figures in the story, and it isn't dated.
Vancity Electric: measuring every job
Vancity Electric does residential and commercial work. Jobber, the software company, published its story in March 2026 and calls the company Vancouver-based without saying which Vancouver. As it grew, coordinating crews and managing quotes got harder, and the team was juggling tools and spreadsheets.3
The fix was to measure labor and margin on each job. The team logs time against each job, labor cost rolls into job costing, and quotes are built from saved line items. Owner Cory Byron put it simply: "When you start measuring things, you can make them better."3 He said gross margin went from 20% to 50%, and that job costing was a huge part of it.
Day-View Electric: service bills weeks sooner
Day-View Electric is a Canadian shop in Ottawa, Ontario, with about 25 employees and separate project and service divisions. According to a customer story from Jonas Construction Software, its service side ran on Excel, email and paper. Timecards could take up to two weeks to come in, and clients sometimes got bills three to five weeks after the work.4
Now techs enter time and close out calls in the field, so an invoice can go out the same day. Owner Vickie Brunet said volume rose about 30%, that they saved at least 30% to 50% on the costing process in service, and that invoices go out four to six weeks earlier than before.4
C&R Electric: AI on the design side
This one comes from ENR, an independent trade publication, in January 2026. C&R Electric of Shepherd, Michigan, is an electrical contractor that prefabricates in its own shop. On two elementary school jobs in the Lansing School District, it used an AI tool from a company called Augmenta to generate conduit routing from the project model, then built the assemblies in its shop.5
President Kyle Sponseller told ENR they cut 100 hours from the design process at Mt. Hope Elementary. Augmenta's own CEO claimed 50% faster design and 15% savings in materials there. On the next school, Willow Elementary, the article reports design time down another 50%, with about 400 hours of manual drafting becoming 80, and material waste down 25%.5 That's design and prefab work, well away from the back office.
What keeps coming up
- A lot of the money was in billing. Enhanced Electrical and Day-View both describe invoices going out weeks late and materials that never made it onto a bill. The fixes were plain. Our post on finished work that never got invoiced covers where to look.
- Job costing pays off when someone compares it to the estimate. Enhanced Electrical changed its bids after checking estimated hours against actuals. Here's how to run that check every month.
- Scattered systems come first. These shops had to get their records into one place before the useful checks were possible.
- Small, boring reports find real money. A weekly supplier price check and a look at what's on the vans don't need a data team. There's a longer list in questions your records can already answer.
Reading vendor numbers with care
Nearly every figure above was published by a company selling the software that got the credit. Plenty of them are probably close. A few habits still help.
- Ask who said it. A number in the owner's own words carries more weight than one in a summary box. Dane Electric's story, published by BuildOps, reports invoicing time cut by over 30%, but the figure appears only in the vendor's headline and summary boxes, with no one at the company named.6
- Check whether the numbers agree. Day-View's owner gave a range of 30% to 50% for costing savings. The vendor's summary states it as up to 50%.4
- Watch for projections. Vancity's page lists revenue going from $500K to $1.4M without saying who said so, and the text describes the company as on track for $1.4 million. That may not be a finished year.3
- Notice what else changed. Vancity changed its quoting, its time tracking and its size all at once. Job costing probably helped the margin. How much, you can't tell from outside.
The habits travel to your shop. A headline percentage usually doesn't.
Sources
- Simpro, "Enhanced Electrical" customer case study (undated). Vendor marketing. cdn.featuredcustomers.com
- Simpro, "Middlebury Electric" customer case study (undated). Vendor marketing. cdn.featuredcustomers.com
- Jobber, "How Vancity Electric Built a $1.4M Electrical Business and Hit 50% Margins with Jobber" (March 31, 2026). Vendor marketing. getjobber.com
- Jonas Construction Software, "Day-View Electric case study" (undated). Vendor marketing. jonasconstruction.com
- ENR, Jeff Yoders, "Augmenta AI helps organize electrical work on school jobs" (January 29, 2026). Trade press. enr.com
- BuildOps, "How Dane Electric Boosts Efficiency and Cuts Invoicing Time by Over 30% with BuildOps" (updated September 3, 2024). Vendor marketing. buildops.com
What would you ask your own records?
Send us the one question you can't answer today, in your own words. We'll talk through whether the records you already keep can answer it. The Tiber River Business Data Platform is accepting design partners, and you can click around the live demo with a fictional company first.
Email Josh your questionOr write to josh@tiberriverconsulting.com